If you find a tag in which you are interested, you may click the “Order” link to select your options and engraving information.
All prices include mailing charges and applicable taxes.
All tags mailed via U.S. First Class Mail within 24 hours.
Round TagMini, Small, Medium, Large
$10.49
Free Shipping (U.S.)
No Tax
Round Stainless Steel Tags
Deeply Engraved Text that holds up over time
Can be engraved front and back
One to five lines per side
mini: ……… 13/16″ diameter (cats or tiny dogs)
small: …….. 1″ diameter (small dogs or large cats)
medium: … 1 1/4″ diameter (mid-sized dogs)
large:……… 1 1/2″ diameter (big / large dogs)
Bone Shaped TagMini, Small, Medium, Large, Jumbo
$10.49
Free Shipping (U.S.)
No Tax
Bone-shaped tag in Stainless Steel. Lettering is deeply engraved.
Includes “S” Hook or Split Ring to attach.
Note: On our small size tags we strongly recommend that you spread your text out over the front and back. Doing so will result in a larger font point size which in turn will make the tag text easier to read.
Sizes listed as inches High x Wide (to the “tips”)
Mini…………..11/16 x 1 (‘tiny’ dogs)
Small…………7/8 x 1 1/4 (jack russel sized)
Medium……..1 x 1 9/16 (cockers to boxers)
Large………..1 3/16 x 1 3/4 (lab sized dogs)
Jumbo……….1 3/8 x 2.0 (only for very large dogs)
Heart Shaped TagMini, Small, Medium, Large
$10.49
Free Shipping (U.S.)
No Tax
Heart-shaped tag in Stainless Steel. Lettering is deeply engraved.
Includes “S” Hook or Split Ring to attach.
Note: Due to the basic “V” shape of the hearts, they tend to run a little wide. The engraveable area is comparable to other shapes of the same size. Margins do narrow lower on this shape, so long lines of text on lines 4 and 5 may need to be condensed to fit. Our software will take care of this for you, but the long text lines requested lower on the tag might appear “scrunched.”
Sizes listed as High x Wide (to the “tips”)
Mini……..3/4 x 13/16 (dime-sized: for cats & ‘toy’ dogs)
Small……1 x 1 1/16 (small dogs)
Medium…1 1/4 x 1 3/8 (mid-size: retrievers, etc)
Large……1 1/4 x 1 9/16 (very large breeds)
The “mini” size can only hold 3 short lines of text.
Mini
$9.95
Free Shipping (U.S.)
No Tax
Cat-face tag made of Stainless Steel.
This tag is 7/8 inch in diameter.
Includes “S” Hook or Split Ring to attach.
Since the cat face image is on the front, only the back can have your text. This is a small tag – engraving is limited to four (4) lines.
NOTE: I strongly recommend using a Split Rings for attaching tags to cat collars. When using the ring, put the tag on the ring, and then thread the collar THROUGH the ring. This method alleviates some of the “hangy” look and also causes the tag to face out (not sideways). The “cool” way to attach tags to the collars of cats and tiny dogs.
RivetSmall, Medium
$10.95
Free Shipping (U.S.)
No Tax
Rivet on CollarTag™ in Stainless Steel.
Arrive bent to the contour of your pet’s neck and come with rivets you “install” (see photo and read NOTE below). Great for leather collars.
Small measures 5/8″ high by 1 3/4″ long
Medium measures 3/4″ high by 2 1/2″ long
Ideal for leather collars.
NOTE: Our Rivet On tags are nice, but there are a few things I want you to be aware of before you order one of them. The first thing is that while these tags are stainless steel they are the only stainless tags we offer that are NOT non magentic stainless. That said the tags themselves are of the highest quality but “a chain is only as strong as it’s weakest link” and the weak link here is the “rivets” we supply with these tags. These can be “installed” by anyone, but they are not as secure as some other methods one might use, such as “pop rivets” (available at most hardware stores), or better yet, having them professionally installed at a local leather shop. We cannot install these for you, we just sell a very high quality tag, and supply you with the split rivets (see photo) the rest is up to you. If these tags are installed / put on the collar using a secure method the tag itself should last for the life of your pet.
Rivet on CollarTag™ in Stainless Steel.
Arrive bent to the contour of your pet’s neck and come with rivets you “install” (see photo and read NOTE below). Great for leather collars.
Small measures 5/8″ high by 1 3/4″ long
Medium measures 3/4″ high by 2 1/2″ long
Ideal for leather collars.
NOTE: Our Rivet On tags are nice, but there are a few things I want you to be aware of before you order one of them. The first thing is that while these tags are stainless steel they are the only stainless tags we offer that are NOT non magentic stainless. That said the tags themselves are of the highest quality but “a chain is only as strong as it’s weakest link” and the weak link here is the “rivets” we supply with these tags. These can be “installed” by anyone, but they are not as secure as some other methods one might use, such as “pop rivets” (available at most hardware stores), or better yet, having them professionally installed at a local leather shop. We cannot install these for you, we just sell a very high quality tag, and supply you with the split rivets (see photo) the rest is up to you. If these tags are installed / put on the collar using a secure method the tag itself should last for the life of your pet.
Man Tag: Human I.D. TagLarge
$10.95
Free Shipping (U.S.)
No Tax
Human Medical Information TagLarge
$11.95
Free Shipping (U.S.)
No Tax
Our Military Style Tags are made of non-magnetic stainless steel. These tags are 2″ x 1-1/8″ and are too thick to be bent with your fingers. The tag is engraved, not embossed or stamped. The tag can be engraved front and back with any text you enter in the fields (up to 5 lines on a side).
This is a very high quality tag, excellent as personal medical information alert tags. They are the same shape as “authentic” military tags but made using thicker (.060) – surgical grade stainless steel.
If desired, each tag comes with a 24″ steel ball chain (no longer the chain currently pictured on the site). If you would like a chain, please select the “chain” option below. If the tag is for pet id, a keyring or other purpose, you may decline the chain and select a split ring or S hook.
Mini Collar Tag: for regular or adjustable collarMini
$10.95
Free Shipping (U.S.)
No Tax
deeply engraved and color filled. Ideal for cats or tiny dogs with collars 3/8″ or 1/2″ wide collars (see below).
Using these will: eliminate clinking tag noises, avoid that obnoxious “hangy” tag look, and keep your pet’s tag out of the food dish. We guarantee CollarTags™ will remain attached to a collar of a width for which they are designed (see below).
For 3/8″ wide nylon collars – choose collar style:
For 1/2″ wide collars (Note: measure, do not guess at the width):
This “miniature” size is limited to 4 lines of text.
For wider collars that are 5/8″, 3/4″, or 1″ wide, we offer three tag styles to fit on almost any collar. Please click one of the links below to see the correct product.
Slide on Collar TagMini, Small, Medium, Large
$12.49
Free Shipping (U.S.)
No Tax
Slide-on CollarTag™ in Stainless Steel. This style CollarTag is correct for single ply nylon collars that close with a pin type belt buckle.
This style CollarTag CANNOT be installed on adjustable length collars / collars that close with a snap or clasp type buckle; click here to order the correct style CollarTag for an adjustable length collar that closes with a clasp, or a Martingale Collar. Or, click here to order the correct style slide-on CollarTag for a thick double-ply nylon or leather collar that closes with a pin type buckle.
CollarTags are superior to traditional hanging tags in every way. Each tag is deeply engraved and color filled.
CollarTag Sizing: The width of the collar determines the size CollarTag you need.
If your pet’s collar is:
3/8 inch wide, use the mini size.
1/2 inch wide, use the mini adjustable size.
5/8 inch wide, select the small size.
3/4 inch wide, select the medium size.
1.0 inch wide, select the large size.
Mini, Small, Medium, Large
$12.49
Free Shipping (U.S.)
No Tax
For ADJUSTABLE LENGTH COLLARS that close with a clasp or snap type buckle. Tags are made of Non-Magnetic Stainless Steel .060 thick and bent to match the curve of your pet’s neck.
We guaranteed they will not fall off.
We have this style in sizes that fit on:
3/8 inch wide collars, use the mini size
1/2 inch wide collars, use the mini size
5/8 inch wide collars, size small
3/4 inch wide collars, size medium
1.0 inch wide collars, size large
This CollarTag design will work on any single-ply nylon webbing, and again: We GUARANTEE they will not fall your pet’s collar provided you order the appropriate size based on the width of the collar the pet you are ordering the tag for wears. This is the correct CollarTag to order for Martingale and Invisible Fence collars. This style CollarTag also works on harnesses made from standard single-ply nylon webbing. In short this is the CollarTag Design to order for any webbing (collar or harness) that does not allow you to slide a CollarTag onto due to a clasp – or for any other reason.
Order Mini Adjustable CollarTags™ here
Note on size selection:
The size CollarTag you need is based on the width of the collar your pet wears. No other factor affects CollarTag size selection. If you measure the collar width, and then select the radio button below that reflects that measurement, you will get a CollarTag that fits your pet’s collar every time.
Mini, Small, Medium, Large
$14.99
Free Shipping (U.S.)
No Tax
NOTE: This is not the correct CollarTag for Adjustable Length Collars / any collar that close with a snap or clasp.
Order Adjustable Length Collar CollarTags here.
Made of Non-magnetic Stainless Steel and bent to fit double thick nylon and leather
collars 3/8, 5/8, 3/4 or 1″ wide & 3/16″ thick. Our design allows use on virtually all double thick collars, even those with eyelets in the buckle holes. I’ve had some very nice comments from people who have bought this tag. If your dog is very active and wears a one inch wide double thick nylon collar or a leather collar, this is the tag to buy. These will also work on Rolled Leather Collars and Aspen Comfort Collars 3/4 or 1 inch wide, but you will not be able to use the two holes furthest in from the end (the tag needs to use this space and will cover those two holes).
I have also been told by some of our horse-loving customers that these make great halter tags for horse identification.
Note on size selection:
The size CollarTag you need is based on the width of the collar your pet wears. No other factor affects CollarTag size selection. If you measure the collar width, and then select the radio button below that reflects that measurement, you will get a CollarTag that fits your pet’s collar every time. We do not have a CollarTag size designed for 1/2″ wide leather, the 5/8″ wide size will be usable, but the tag will have a slot in it 1/8″ wider than the collar.
Mini
$15.49
Free Shipping (U.S.)
No Tax
Mini Tag Combo for very small pets. 3/8 inch wide collar available for necks sizes of 7 inches to 11 inches in circumference.
These are not “break-away” collars. We do not recommend either of these collar styles for cats. NEW! click here to order a break-away collar with CollarTag™.
Two Collar Styles to choose from:
• Standard collar with belt buckle.
• Adjustable collar, plastic snap “buckles”.
Each Collar comes with one of our mini stainless steel CollarTags™, engraved with your information & “installed” on the collar. We don’t sell junk, these collars are quite nice (Hamilton).
“Mini” size is limited to 4 lines of text.
Available colors:
Raspberry, Red, Green, Black, Hot Pink, Purple, Blue
$16.49
Free Shipping (U.S.)
No Tax
These collars are the well-known “Beastie Band” cat safety collar made by TwinCat USA. The collar is 1/2″ wide and ships with our “mini” slide-on tag. IMHO these are the best cat safety collars made. They close with Velcro, the material is a soft neoprene which stretches if stressed but is not so elastic that the collars falls off at, “the drop of a hat.”
If you do not feel your cat needs a safety collar, please click here to order an adjustable or belt-buckle style collar with CollarTag™.
Beastie Band Collars are cut to fit, so the neck size you indicate is not crucial. They can be adjusted to fit necks from 5 to 11.5 inches. When received, merely cut off the excess material to fit your cat’s neck. For kittens you can leave some excess and thus the collar can be adjusted to fit as your new friend grows.
We stock several designs – click the ‘Collar Design’ link below to view the styles we stock. A “cool” bonus is that the white part of the patterned designs actually glows in the dark.
$18.95
Free Shipping (U.S.)
No Tax
Each collar arrives with a slide-on CollarTag™ in Stainless Steel, engraved with the text copy you request. Collars are 5/8″, 3/4″, or 1″ inch wide depending on measurement of your pet’s neck.
Neck Size: 12 – 14 Collar Width: 5/8″
Neck Size: 15 – 17 Collar Width: 3/4″
Neck Size: 18 – 26 Collar Width: 1.0″
We want the pet’s neck circumference, NOT the collar length; this way we can be certain to send the correct size collar. Neck size must be between 11″ and 25″. This is not a collar ‘size’, and not necessarily a number on your collar, so please measure the actual neck circumference.
Mini size also available for neck sizes: 7″ – 11″
Available colors:
Black, Hot Pink, Blue, Red, Green
$22.49
Free Shipping (U.S.)
No Tax
Adjustable collars that close with plastic snaps. Recommended for growing pets.
Order 7″ – 11″ neck size mini collar here. (i.e., for very small dogs) Please first measure your pet’s neck circumference.
A High Quality Adjustable Collar made by Hamilton We have upgraded the collar, the picture is of the old style These are very nice collars!! You will be pleased.
Each collar comes with one of our adjustable Stainless Steel CollarTags We Guarantee the tag will not fall off, and trust me! they won’t.
These collars are quite sturdy – an improved leash ring design minimizes stress on the plastic buckle. Our customers generally find these collars hold up well for years. The printable assembly instructions illustrate this design.
NOTE: Use 12 inches here for small but “beefier” pets. If your pet is more “slight,” we suggest ordering the mini combo.
Available colors:
Black, Hot Pink, Blue, Red, Green
Large
$24.99
Free Shipping (U.S.)
No Tax
Excellent for very active dogs, these collars are durable. Fit neck circumferences between 15 and 26 inches. Each collar comes with one of our double thick stainless steel CollarTags™ engraved on one side with the text of your choice and “installed” onto the collar.
NOTE: These collars are “beefy” and not really suitable for narrow-boned pets or ones with smaller neck circumferences [at or below 15 inches]. We recommend a single-thickness collar for smaller or more slight pets.
When ordering our collars with CollarTags: We want to send you the collar that will fit your pet. We need the circumference of the pet’s neck. Please do NOT give us the length or size of an actual collar, but please tell us the actual measurement around the pet’s neck. And, “for pet’s sake” add a little leeway for comfort. The ideal measurement would be on your pet’s current collar – from the buckle .. to the hole you actually use to attach the collar.
Available colors:
Black, Hot Pink, Blue, Red, Green
Make sure you buy the Authentic Boomerang Tags™ Brand.
All Boomerang Tags™ Components Are Made In The USA
We now have over 10,000 5 STAR Reviews!
